Edimax Technology BR-6478Gn user manual ‐3 LAN, ‐3‐1 LAN IP

Page 36

Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.

3‐3 LAN

You can configure your local area network under “LAN”.

Refer to the following list for further instructions:

z

LAN IP

(See section 3‐3‐1)

z

DHCP Server

(See section 3‐3‐2)

z

Static DHCP Leases

(See section 3‐3‐3)

3‐3‐1 LAN IP

You can assign the LAN interface’s IP address under “LAN IP”.

Item Name

Description

IP Address

Assign the LAN interface’s IP address here.

Subnet Mask

Please input a subnet mask value for this network.

802.1d Spanning Tree

If you wish to activate the 802.1d spanning tree

 

function, select “Enabled”.

DHCP Server

If you wish to activate the DHCP server function,

 

select “Enabled”.

Lease Time

Select a lease time for the DHCP leases here. The

 

DHCP client will be forced to obtain a new IP address

 

after the period expires.

 

You can select “Forever” if you are using this

35

Image 36
Contents BR-6478Gn Copyright Contents Chapter IV STATUS, Tools & Language ‐1 Package Contents Chapter I Product InformationBack Panel Chapter II System and Network Setup ‐1 Establishing a Network Connection‐2‐1 Windows 95/98/Me IP Address Setup ‐2‐2 Windows 2000 IP Address Setup ‐2‐3 Windows XP IP Address Setup ‐2‐4 Windows Vista IP Address Setup Page ‐3 Connecting to Broadband Router via Web Browser System Internet ConnectionLAN Connection ‐4 Using iQ Setup Dynamic IP PPPoE Page ‐5 Using iQoS Page Chapter III General Setup ‐1 System‐1‐1 Time Zone ‐1‐2 Password Settings ‐1‐3 Remote Management ‐2 WAN‐2‐1 Dynamic IP TTL ‐2‐2 Static IP‐2‐3 PPPoE MTU ‐2‐4 Pptp Page BEZEQ‐ISRAEL ‐2‐5 L2TPPage MTU ‐2‐6 Wisp ‐3 LAN ‐3‐1 LAN IP‐3‐2 Dhcp Server ‐3‐3 Static Dhcp LeasesPage ‐4 Wireless ‐4‐1 Wireless Settings‐4‐1‐1 AP Mode ‐4‐1‐2 Station‐Infrastructure Essid ‐4‐1‐3 AP Bridge-Point to Point ‐4‐1‐4 AP Bridge-Point to Multi‐Point ‐4‐1‐5 AP Bridge-WDS Essid ‐4‐1‐6 Universal Repeater Essid ‐4‐2 Security Settings ‐4‐2‐1 Disabled‐4‐2‐2 WEP ‐4‐2‐3 WPA Pre‐Shared Key ‐4‐2‐4 WPA Radius ‐4‐3 MAC Address Filtering ‐4‐4 WPS Wi‐Fi Protected Setup Settings ‐5 Advanced Settings Ssid‐5‐1 QoS Page ‐5‐2 Ddns CyberGate http//cybergate.planex.co.jp/ddns ‐5‐3 Port Forwarding ‐5‐4 DMZ ‐6 NAT ‐6‐1 Virtual ServerPage ‐6‐2 Special Applications ‐6‐3 UPnP Settings ‐6‐4 ALG Settings‐6‐5 Static Routing ‐7 Firewall ‐7‐1 Access Control Page ‐7‐2 URL Blocking ‐7‐3 DoS Page ‐8 Parental Control MACPage ‐1 Status ‐1‐1 Internet Connection‐1‐2 Device Status ‐1‐3 System Log ‐1‐4 Security Log‐1‐5 Active Dhcp Client ‐1‐6 Statistics‐2 Tools ‐2‐1 Configuration Tools ‐2‐2 Firmware Upgrade ‐2‐3 Restart‐3 Language