Item Name | Description |
Band | Select from one of the following options: |
| 2.4GHz (B): Allows 802.11b wireless network clients |
| to connect to this router. |
| 2.4GHz (N): Allows 802.11n wireless network clients |
| to connect to this router. |
| 2.4GHz (B+G): Allows 802.11b and 802.11g wireless |
| network clients to connect to this router. |
| 2.4GHz (G): Allows 802.11g wireless network clients |
| to connect to this router. |
| 2.4GHz (B+G+N): Allows 802.11b, 802.11g, and |
| 802.11n wireless clients to connect to this router |
| (recommended). |
ESSID | This is the name of your router. You can type any |
| alphanumerical character here (maximum 32 |
| characters). |
Channel Number | Select a channel from the dropdown menu. All access |
| points must use the same channel (1 to 13). |
Associated Clients | Click “Show Active Clients” for the list of all |
| connected wireless clients. Click “Refresh” in the |
| new window to renew the list, and click “Close” to |
| close the window. |
| Note: If you have a pop‐up blocker installed, you |
| may have to disable it, or set it to allow the pop‐up |
| window to show up. |
Root AP SSID | Input the SSID of the wireless access point with |
| which you wish to connect. |
Site Survey | Click “Select Site Survey” and a pop‐up window will |
| appear. All reachable wireless access points will be |
| shown in the window. Select a wireless access point |
| from the list, and click “Done” to establish a |
| connection. Clicking “Refresh” will renew the list. |
Wireless Module | Select “Enable” to turn on the 2.4GHz wireless |
| signal and select “Disable” to turn it off. |
47