Edimax Technology BR-6478Gn user manual Mtu

Page 34

Item Name

Description

User ID

Input the user name assigned by your ISP here.

Password

Input the password assigned by your ISP here.

L2TP Gateway

Input the L2TP gateway assigned by your ISP here.

MTU

Input the MTU value of your network connection here. If you

 

do not know, use the default value.

Connection Type

Please specify a connection type here. There are 3 options:

 

1. “Continuous” keeps the Internet connection alive all the

 

time.

 

2. “Connect on Demand” only connects to the Internet when

 

you initiate Internet connection.

 

3. “Manual” connects to the Internet only when the

 

“Connect” button on this page is clicked, and disconnects

 

when the “Disconnect” button is clicked.

Idle Time Out

Specify the amount of time the router waits before shutting

 

down an idle connection. This option is only available when

 

“Connect on Demand” is selected.

Click “Apply” to save the changes. After you have clicked “Apply”, you will see the following message:

Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.

33

Image 34
Contents BR-6478Gn Copyright Contents Chapter IV STATUS, Tools & Language ‐1 Package Contents Chapter I Product InformationBack Panel Chapter II System and Network Setup ‐1 Establishing a Network Connection‐2‐1 Windows 95/98/Me IP Address Setup ‐2‐2 Windows 2000 IP Address Setup ‐2‐3 Windows XP IP Address Setup ‐2‐4 Windows Vista IP Address Setup Page ‐3 Connecting to Broadband Router via Web Browser System Internet ConnectionLAN Connection ‐4 Using iQ Setup Dynamic IP PPPoE Page ‐5 Using iQoS Page Chapter III General Setup ‐1 System‐1‐1 Time Zone ‐1‐2 Password Settings ‐1‐3 Remote Management ‐2 WAN‐2‐1 Dynamic IP TTL ‐2‐2 Static IP‐2‐3 PPPoE MTU ‐2‐4 Pptp Page BEZEQ‐ISRAEL ‐2‐5 L2TPPage MTU ‐2‐6 Wisp ‐3 LAN ‐3‐1 LAN IP‐3‐2 Dhcp Server ‐3‐3 Static Dhcp LeasesPage ‐4 Wireless ‐4‐1 Wireless Settings‐4‐1‐1 AP Mode ‐4‐1‐2 Station‐Infrastructure Essid ‐4‐1‐3 AP Bridge-Point to Point ‐4‐1‐4 AP Bridge-Point to Multi‐Point ‐4‐1‐5 AP Bridge-WDS Essid ‐4‐1‐6 Universal Repeater Essid ‐4‐2‐1 Disabled ‐4‐2 Security Settings‐4‐2‐2 WEP ‐4‐2‐3 WPA Pre‐Shared Key ‐4‐2‐4 WPA Radius ‐4‐3 MAC Address Filtering ‐4‐4 WPS Wi‐Fi Protected Setup Settings ‐5 Advanced Settings Ssid‐5‐1 QoS Page ‐5‐2 Ddns CyberGate http//cybergate.planex.co.jp/ddns ‐5‐3 Port Forwarding ‐5‐4 DMZ ‐6 NAT ‐6‐1 Virtual ServerPage ‐6‐2 Special Applications ‐6‐3 UPnP Settings ‐6‐4 ALG Settings‐6‐5 Static Routing ‐7 Firewall ‐7‐1 Access Control Page ‐7‐2 URL Blocking ‐7‐3 DoS Page ‐8 Parental Control MACPage ‐1‐1 Internet Connection ‐1 Status‐1‐2 Device Status ‐1‐3 System Log ‐1‐4 Security Log‐1‐6 Statistics ‐1‐5 Active Dhcp Client‐2 Tools ‐2‐1 Configuration Tools ‐2‐2 Firmware Upgrade ‐2‐3 Restart‐3 Language