Item Name | Description |
Enable Static Routing | Check this box to enable the function. |
Destination LAN IP | Input the destination LAN IP here. |
Subnet Mask | Input the subnet mask of the destination network |
| here. |
Default Gateway | Input the gateway IP address that leads to the |
| specified network. |
Hop Count | Input the hop count (the distance between the |
| destination network and this broadband router) here. |
Interface | Select the interface that leads to the destination |
| network (LAN or WAN). |
Add | Click “Add” to add the settings to the table. |
Reset | Click “Reset” to clear all the settings. |
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click “Continue” to configure other settings.
3‐7 Firewall
You can configure the firewall functions under “Firewall” to protect your network and computer.
65