Edimax Technology AR-7286WNB user manual Windows XP

Page 22

3.Check your list of Network Components. You should see Internet Protocol Version 4 (TCP/IPv4) on your list. Select it and click the Properties button.

4.In the Internet Protocol Version 4 (TCP/IPv4) Properties window, select Obtain an IP address automatically and Obtain DNS server address automatically as shown on the following screen.

5.Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your router’s DHCP server.

Note: Please make sure that the router’s DHCP server is the only DHCP server available on your LAN.

3.4.Windows XP

1.Click the Start button and select Control Panel and then double click Network Connections. The Network Connections window will appear.

2.Right click on the Local Area Connection icon and select Properties. The Local Area Connection window will appear.

22

Image 22

Contents AR-7286WnA / AR-7286WnB Copyright Contents Trouble Shooting Safety Precautions Package ContentsSystem Requirements LED Status & Button Definitions Front PanelWPS Rear Panel  DMZ Features QOS Connect the Adsl line Connect the router to your LAN networkConnect the power adapter to the router ConfigurationCheck the Adsl LED status Firewall settings PC LAN IP configurationPage Page Page Windows Windows 7, Windows Vista and Windows XPPage Page Windows Windows Vista Windows XP Page EZmax Setup Wizard Setup WizardPlease select your product Page Page Page Internet Connection Type PPPoE/PPPoA Bridge Mode Dynamic IP Address Static IP DescriptionVPI PPoE/PPPoAVCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade AdsltyperoutervcmuxPage Status Accessing the RouterDevice Info System Log Ethernet Statistics StatisticsAdsl Statistics Quick Start Wlan StatisticsPage Auto setup by ISP list Field Description ISPDynamic IP Address Bridge Mode Static IP AddressPPPoE/PPPoA Interface Setup InternetATM CBR, UBR, rtVBR, or nrtVBRMBS PCRSCR Select IPv4 , IPv4/IPv6 or IPv6IPv4 Address VC-Mux,1483 Routed IP LLCIPoA or 1483 Routed IP VC-MuxYou can choose Activated or Deactivated NATIPv6 Address Dual Stack LiteIPv4 Options You can select None , Both , in Only or OUT Only IPv6 OptionsSelect Activated or Deactivated Recommended Connect On-Demand or Connect Manually Field Description Connection SettingYou can select None, Both, in Only or OUT Only Field Description Dual Stack Lite You can choose 1483 Bridged IP LLC or 1483 BridgedLAN Dhcp Select Enable or Disable You may choose ManagedAddr or Other ConfigPage Field Description Access Point Settings WirelessYou may choose Activated or Deactivated Multiple SSIDs Settings 802.11b+g, 802.11n, 802.11g+n or 802.11b+g+n 11n SettingsEven numbers only Select from Disabled , WEP-64Bits , WEP-128Bits Advanced SetupWPS Settings Wireless MAC Address FilterFirewall RoutingNAT Address Mapping for Multiple IP Service DMZ Field Description Overload , Many-to-Many No Overload , or Server QoSChoose the One-to-One , Many-to-One , Many-to-Many IP Version IPv4Field Description Quality of Service RuleMAC Select Low , Medium , High or Highest DscpIP Version IPv6 IPv6 You may select Activated or Deactivated . Activated mustVlan Page Adsl Vlan IDACL Access ManagementChoose Annex a , Annex I , Annex A/L , Annex M or Filter Support Web , FTP , Telnet , Snmp , Ping or AL LFilter Support IP / MAC Filter, Application Filter and URLChoose Both, Incoming or Outgoing Ymsg ICQMSN URL FilterSnmp URLUPnP Ddns CwmpURL for the CPE to connect to the ACS using the CPE WAN Administration MaintenanceTime Zone Firmware Upgrade SysRestartDiagnostics Question Answer 255.255.255.0, respectivelyEU Declaration of Conformity Weee Directive & Product DisposalDeclaration of Conformity