The following table describes the parameters in this page:
| Field |
|
| Description |
|
|
|
|
| Virtual path identifier (VPI) is the virtual path between two |
|
| VPI |
|
| points in an ATM network. Its valid value is between 0 and |
|
|
|
| 255. Enter the correct VPI provided by your ISP. By default, |
| |
|
|
|
|
| |
|
|
|
| VPI is set to 8. |
|
|
|
|
| Virtual channel identifier (VCI) is the virtual channel between |
|
| VCI |
|
| two points in an ATM network. Its valid value is between 1 |
|
|
|
| and 65535. Enter the correct VCI provided by your ISP. By |
| |
|
|
|
|
| |
|
|
|
| default, VCI is set to 35. |
|
| Connection |
|
| You can select LLC or |
|
| Type |
|
| encapsulation mode is set to 1483 Bridged IP LLC. |
|
5.3.3.Dynamic IP Address
For configuration method, please refer to that of Auto setup by ISP list Select Auto setup by ISP list, click NEXT, and the page as shown in the following figure appears.
The following table describes the parameters in this page:
| Field |
| Description |
|
| Country |
| Select the country you are in. |
|
| ISP |
| Select your Internet Service Provider (ISP). |
|
|
|
| Virtual path identifier (VPI) is the virtual path between two |
|
| VPI |
| points in an ATM network. Its valid value is between 0 and |
|
|
|
| 255. Enter the correct VPI provided by your ISP. |
|
| VCI |
| Virtual channel identifier (VCI) is the virtual channel between |
|
|
| 44 |
| |