Edimax Technology AR-7286WNB user manual Field Description Connection Setting

Field		Description
Connection Setting
Connection		You can choose Always	On	(Recommended),
		Connect On-Demand or Connect Manually.
TCP MSS Option		You can set a TCP MSS value. The range is from 100
		to 1452. The default is 1400.
IP Common Options
Default Route		You can enable or disable default route.
IPv4 Address
Get IP Address		You can choose Static or Dynamic.
Static IP Address		You can enter the IP address for dial-up, which is
		provided by your ISP.
IP Subnet Mask		The default is 255.255.255.255.
Gateway		You can enter the gateway IP for dial-up, which is
		provided by your ISP.
TCP MTU Option		You can set a TCP MTU value. The range is from 100
		to 1500. The default is 1492.
		Select whether to enable Network Address
		Translation (NAT) function. If you do not enable NAT,
NAT		you must add a route on the uplink equipment,
		otherwise Internet access will fail. Normally NAT is
		enabled.
Dynamic Route		You can select RIP1, RIP2-Bor RIP2-M.
Direction		You can select None, Both, IN Only or OUT Only.
		IGMP (Internet Group Multicast Protocol) is a
		session-layer protocol used to establish membership
Multicast		in a multicast group. The ADSL Router supports both
		IGMP version 1 (IGMP v1) and IGMP version 2 (IGMP
		v2). Select Disabled to disable it.
IPv6 Address
DHCP IPv6		Provide address assignment	to	hosts to include
	55