Edimax Technology AR-7286WNB user manual Accessing the Router, Status, Device Info

Page 37

5. Web Configuration

The router can also be configured using the web-based configuration interface. Follow the instructions below.

5.1. Accessing the Router

To access the web-based configuration interface:

1.Open the Internet Explorer (IE) browser and enter http://192.168.2.1.

2.In the Login page that is displayed, enter the username and password.

The username and password of the super user are admin and 1234.

The username and password of a common user are user and user.

Note:

In the Web configuration page, the settings can be saved permanently.

5.2. Status

In the navigation bar, click Status. In the Status page that is displayed contains Device Info, System Log and Statistics.

5.2.1.Device Info

Choose Status > Device Info. The page that is displayed shows the current status and some basic settings of the router, such as model number, software version, LAN, WAN and ADSL information.

37

Image 37

Contents AR-7286WnA / AR-7286WnB Copyright Contents Trouble Shooting Safety Precautions Package ContentsSystem Requirements Front Panel LED Status & Button DefinitionsWPS Rear Panel  DMZ Features QOS Connect the router to your LAN network Connect the Adsl lineConfiguration Connect the power adapter to the routerCheck the Adsl LED status PC LAN IP configuration Firewall settingsPage Page Page Windows 7, Windows Vista and Windows XP WindowsPage Page Windows Windows Vista Windows XP Page Setup Wizard EZmax Setup WizardPlease select your product Page Page Page Internet Connection Type Description PPPoE/PPPoA Bridge Mode Dynamic IP Address Static IPVPI PPoE/PPPoAVCI Bridge Mode Dynamic IP Address Static IP Adsltyperoutervcmux Firmware UpgradePage Status Accessing the RouterDevice Info System Log Ethernet Statistics StatisticsAdsl Statistics Wlan Statistics Quick StartPage Auto setup by ISP list ISP Field DescriptionDynamic IP Address Static IP Address Bridge ModePPPoE/PPPoA Internet Interface SetupCBR, UBR, rtVBR, or nrtVBR ATMSCR PCRMBS Select IPv4 , IPv4/IPv6 or IPv6You can choose Activated or Deactivated VC-Mux,1483 Routed IP LLCIPoA or 1483 Routed IP VC-MuxIPv4 Address NATDual Stack Lite IPv6 AddressIPv4 Options IPv6 Options You can select None , Both , in Only or OUT OnlySelect Activated or Deactivated Recommended Connect On-Demand or Connect Manually Field Description Connection SettingYou can select None, Both, in Only or OUT Only You can choose 1483 Bridged IP LLC or 1483 Bridged Field Description Dual Stack LiteLAN Dhcp You may choose ManagedAddr or Other Config Select Enable or DisablePage Field Description Access Point Settings WirelessYou may choose Activated or Deactivated Multiple SSIDs Settings 802.11b+g, 802.11n, 802.11g+n or 802.11b+g+n 11n SettingsEven numbers only WPS Settings Advanced SetupSelect from Disabled , WEP-64Bits , WEP-128Bits Wireless MAC Address FilterRouting FirewallNAT Address Mapping for Multiple IP Service DMZ Field Description Choose the One-to-One , Many-to-One , Many-to-Many QoSOverload , Many-to-Many No Overload , or Server IP Version IPv4Rule Field Description Quality of ServiceMAC Select Low , Medium , High or Highest DscpIP Version IPv6 You may select Activated or Deactivated . Activated must IPv6Vlan Page Vlan ID AdslACL Access ManagementChoose Annex a , Annex I , Annex A/L , Annex M or Support Web , FTP , Telnet , Snmp , Ping or AL L FilterFilter Support IP / MAC Filter, Application Filter and URLChoose Both, Incoming or Outgoing MSN ICQYmsg URL FilterURL SnmpUPnP Cwmp DdnsURL for the CPE to connect to the ACS using the CPE WAN Administration MaintenanceTime Zone Firmware SysRestart UpgradeDiagnostics 255.255.255.0, respectively Question AnswerWeee Directive & Product Disposal EU Declaration of ConformityDeclaration of Conformity