Edimax Technology AR-7286WNB user manual URL for the CPE to connect to the ACS using the CPE WAN

Page 84

The following table describes the parameters of this page:

Field

Description

URL

URL for the CPE to connect to the ACS using the CPE WAN

 

Management Protocol. This parameter must be in the form of a

 

valid http or https URL.

User

Username used to authenticate the CPE when making a

Name

connection to the ACS using the CPE WAN Management

 

Protocol.

Password

Password used to authenticate the CPE when making a

 

connection to the ACS using the CPE WAN Management

 

Protocol.

User

CPE’s username, the connection username provided by TR-069

Name

service

Password

CPE’s password, the connection password provided by TR-069

 

service for a connection request to the CPE.

Periodic

Select Activated to periodically connect to the ACS to check for

Inform

configuration updates.

Interval(s)

Specify the duration between two connections to ACS.

84

Image 84
Contents AR-7286WnA / AR-7286WnB Copyright Contents Trouble Shooting Package Contents Safety PrecautionsSystem Requirements LED Status & Button Definitions Front PanelWPS Rear Panel Features  DMZ QOS Connect the Adsl line Connect the router to your LAN networkConnect the power adapter to the router ConfigurationCheck the Adsl LED status Firewall settings PC LAN IP configurationPage Page Page Windows Windows 7, Windows Vista and Windows XPPage Page Windows Windows Vista Windows XP Page EZmax Setup Wizard Setup WizardPlease select your product Page Page Page Internet Connection Type PPPoE/PPPoA Bridge Mode Dynamic IP Address Static IP DescriptionPPoE/PPPoA VPIVCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade AdsltyperoutervcmuxPage Accessing the Router StatusDevice Info System Log Statistics Ethernet StatisticsAdsl Statistics Quick Start Wlan StatisticsPage Auto setup by ISP list Field Description ISPDynamic IP Address Bridge Mode Static IP AddressPPPoE/PPPoA Interface Setup InternetATM CBR, UBR, rtVBR, or nrtVBRPCR SCRMBS Select IPv4 , IPv4/IPv6 or IPv6VC-Mux,1483 Routed IP LLCIPoA or 1483 Routed IP VC-Mux You can choose Activated or DeactivatedIPv4 Address NATIPv6 Address Dual Stack LiteIPv4 Options You can select None , Both , in Only or OUT Only IPv6 OptionsSelect Activated or Deactivated Field Description Connection Setting Recommended Connect On-Demand or Connect ManuallyYou can select None, Both, in Only or OUT Only Field Description Dual Stack Lite You can choose 1483 Bridged IP LLC or 1483 BridgedLAN Dhcp Select Enable or Disable You may choose ManagedAddr or Other ConfigPage Wireless Field Description Access Point SettingsYou may choose Activated or Deactivated 802.11b+g, 802.11n, 802.11g+n or 802.11b+g+n 11n Settings Multiple SSIDs SettingsEven numbers only Advanced Setup WPS SettingsSelect from Disabled , WEP-64Bits , WEP-128Bits Wireless MAC Address FilterFirewall RoutingNAT Address Mapping for Multiple IP Service DMZ Field Description QoS Choose the One-to-One , Many-to-One , Many-to-ManyOverload , Many-to-Many No Overload , or Server IP Version IPv4Field Description Quality of Service RuleMAC Dscp Select Low , Medium , High or HighestIP Version IPv6 IPv6 You may select Activated or Deactivated . Activated mustVlan Page Adsl Vlan IDAccess Management ACLChoose Annex a , Annex I , Annex A/L , Annex M or Filter Support Web , FTP , Telnet , Snmp , Ping or AL LSupport IP / MAC Filter, Application Filter and URL FilterChoose Both, Incoming or Outgoing ICQ MSNYmsg URL FilterSnmp URLUPnP Ddns CwmpURL for the CPE to connect to the ACS using the CPE WAN Maintenance AdministrationTime Zone Firmware Upgrade SysRestartDiagnostics Question Answer 255.255.255.0, respectivelyEU Declaration of Conformity Weee Directive & Product DisposalDeclaration of Conformity