Edimax Technology AR-7286WNB user manual Interface Setup, Internet

Page 47

Field	Description
Type	encapsulation mode is set to PPPoE LLC.

After setting, click NEXT, the page as shown in the following figure appears.

Click BACK to modify the settings.

Click NEXT to save the settings.

Click EXIT to cancel the settings.

Note:

After you saving the settings in the Quick Start page, you can view this wan connection settings in the Interface Setup > Internet page.

5.4. Interface Setup

In the navigation bar, click Interface Setup. The Interface Setup page that is displayed contains Internet, LAN and Wireless.

5.4.1.Internet

Choose Interface Setup > Internet. The Internet page that is displayed contains ATM VC, Qos, IPv4/IPv6 and Encapsulation.

Click Internet pane, the page shown in the following figure appears. In this page, you can configure the WAN interface of your router.

47

Image 47

Contents AR-7286WnA / AR-7286WnB Copyright Contents Trouble Shooting System Requirements Package ContentsSafety Precautions Front Panel LED Status & Button DefinitionsWPS Rear Panel  QOS Features DMZ Connect the router to your LAN network Connect the Adsl lineConfiguration Connect the power adapter to the routerCheck the Adsl LED status PC LAN IP configuration Firewall settingsPage Page Page Windows 7, Windows Vista and Windows XP WindowsPage Page Windows Windows Vista Windows XP Page Setup Wizard EZmax Setup WizardPlease select your product Page Page Page Internet Connection Type Description PPPoE/PPPoA Bridge Mode Dynamic IP Address Static IPVCI PPoE/PPPoAVPI Bridge Mode Dynamic IP Address Static IP Adsltyperoutervcmux Firmware UpgradePage Device Info Accessing the RouterStatus System Log Adsl Statistics StatisticsEthernet Statistics Wlan Statistics Quick StartPage Auto setup by ISP list ISP Field DescriptionDynamic IP Address Static IP Address Bridge ModePPPoE/PPPoA Internet Interface SetupCBR, UBR, rtVBR, or nrtVBR ATMSelect IPv4 , IPv4/IPv6 or IPv6 PCRSCR MBSNAT VC-Mux,1483 Routed IP LLCIPoA or 1483 Routed IP VC-MuxYou can choose Activated or Deactivated IPv4 AddressDual Stack Lite IPv6 AddressIPv4 Options IPv6 Options You can select None , Both , in Only or OUT OnlySelect Activated or Deactivated You can select None, Both, in Only or OUT Only Field Description Connection SettingRecommended Connect On-Demand or Connect Manually You can choose 1483 Bridged IP LLC or 1483 Bridged Field Description Dual Stack LiteLAN Dhcp You may choose ManagedAddr or Other Config Select Enable or DisablePage You may choose Activated or Deactivated WirelessField Description Access Point Settings Even numbers only 802.11b+g, 802.11n, 802.11g+n or 802.11b+g+n 11n SettingsMultiple SSIDs Settings Wireless MAC Address Filter Advanced SetupWPS Settings Select from Disabled , WEP-64Bits , WEP-128BitsRouting FirewallNAT Address Mapping for Multiple IP Service DMZ Field Description IP Version IPv4 QoSChoose the One-to-One , Many-to-One , Many-to-Many Overload , Many-to-Many No Overload , or ServerRule Field Description Quality of ServiceMAC IP Version IPv6 DscpSelect Low , Medium , High or Highest You may select Activated or Deactivated . Activated must IPv6Vlan Page Vlan ID AdslChoose Annex a , Annex I , Annex A/L , Annex M or Access ManagementACL Support Web , FTP , Telnet , Snmp , Ping or AL L FilterChoose Both, Incoming or Outgoing Support IP / MAC Filter, Application Filter and URLFilter URL Filter ICQMSN YmsgURL SnmpUPnP Cwmp DdnsURL for the CPE to connect to the ACS using the CPE WAN Time Zone MaintenanceAdministration Firmware SysRestart UpgradeDiagnostics 255.255.255.0, respectively Question AnswerWeee Directive & Product Disposal EU Declaration of ConformityDeclaration of Conformity