Edimax Technology AR-7286WNB user manual

Page 75

Each physical port has a default VID called PVID (Port VID). PVID is assigned to untagged frames or priority tagged frames (frames with null (0) VID) received on this port. You can set a PVID for an ATM VC, Ethernet port or Wireless LAN.

In the VLAN page, choose Activated and then Define VLAN Group, and the page shown in the following figure appears.

75

Image 75

Contents AR-7286WnA / AR-7286WnB Copyright Contents Trouble Shooting Package Contents Safety PrecautionsSystem Requirements Front Panel LED Status & Button DefinitionsWPS Rear Panel Features  DMZ QOS Connect the router to your LAN network Connect the Adsl lineConfiguration Connect the power adapter to the routerCheck the Adsl LED status PC LAN IP configuration Firewall settingsPage Page Page Windows 7, Windows Vista and Windows XP WindowsPage Page Windows Windows Vista Windows XP Page Setup Wizard EZmax Setup WizardPlease select your product Page Page Page Internet Connection Type Description PPPoE/PPPoA Bridge Mode Dynamic IP Address Static IPPPoE/PPPoA VPIVCI Bridge Mode Dynamic IP Address Static IP Adsltyperoutervcmux Firmware UpgradePage Accessing the Router StatusDevice Info System Log Statistics Ethernet StatisticsAdsl Statistics Wlan Statistics Quick StartPage Auto setup by ISP list ISP Field DescriptionDynamic IP Address Static IP Address Bridge ModePPPoE/PPPoA Internet Interface SetupCBR, UBR, rtVBR, or nrtVBR ATMSelect IPv4 , IPv4/IPv6 or IPv6 PCRSCR MBSNAT VC-Mux,1483 Routed IP LLCIPoA or 1483 Routed IP VC-MuxYou can choose Activated or Deactivated IPv4 AddressDual Stack Lite IPv6 AddressIPv4 Options IPv6 Options You can select None , Both , in Only or OUT OnlySelect Activated or Deactivated Field Description Connection Setting Recommended Connect On-Demand or Connect ManuallyYou can select None, Both, in Only or OUT Only You can choose 1483 Bridged IP LLC or 1483 Bridged Field Description Dual Stack LiteLAN Dhcp You may choose ManagedAddr or Other Config Select Enable or DisablePage Wireless Field Description Access Point SettingsYou may choose Activated or Deactivated 802.11b+g, 802.11n, 802.11g+n or 802.11b+g+n 11n Settings Multiple SSIDs SettingsEven numbers only Wireless MAC Address Filter Advanced SetupWPS Settings Select from Disabled , WEP-64Bits , WEP-128BitsRouting FirewallNAT Address Mapping for Multiple IP Service DMZ Field Description IP Version IPv4 QoSChoose the One-to-One , Many-to-One , Many-to-Many Overload , Many-to-Many No Overload , or ServerRule Field Description Quality of ServiceMAC Dscp Select Low , Medium , High or HighestIP Version IPv6 You may select Activated or Deactivated . Activated must IPv6Vlan Page Vlan ID AdslAccess Management ACLChoose Annex a , Annex I , Annex A/L , Annex M or Support Web , FTP , Telnet , Snmp , Ping or AL L FilterSupport IP / MAC Filter, Application Filter and URL FilterChoose Both, Incoming or Outgoing URL Filter ICQMSN YmsgURL SnmpUPnP Cwmp DdnsURL for the CPE to connect to the ACS using the CPE WAN Maintenance AdministrationTime Zone Firmware SysRestart UpgradeDiagnostics 255.255.255.0, respectively Question AnswerWeee Directive & Product Disposal EU Declaration of ConformityDeclaration of Conformity