| Field |
|
| Description |
|
|
|
|
|
|
|
|
| Auto Discovered, the router accepts the |
|
|
|
| DNS assignment from one of the PPPoA, PPPoE or MER |
|
|
|
| enabled PVC(s) during the connection establishment. If |
|
|
|
| select User Discovered, enter the IP addresses of the |
|
|
|
| primary and secondary DNS servers. |
|
|
|
|
|
| Primary DNS |
|
| DNS server FOR wan and LAN |
| Server |
|
|
|
|
|
|
|
|
| Secondary |
|
| DNS server FOR wan and LAN |
| DNS Server |
|
|
|
|
|
|
|
|
|
|
|
| You may choose to enable or disable Radvd. The Router |
|
|
|
| Advertisement Daemon (Radvd) is an |
| Radvd Enable |
|
| software product that implements |
|
|
| advertisements of IPv6 router addresses and IPv6 | |
|
|
|
| |
|
|
|
| routing prefixes using the Neighbor Discovery Protocol |
|
|
|
| (NDP). |
|
|
|
|
|
| Radvd Mode |
|
| You may choose Auto or Manual. |
|
|
|
|
|
| Auto Prefix |
|
| Select Enable or Disable. |
|
|
|
|
|
| RA Flag Set |
|
| You may choose ManagedAddr or Other Config. |
|
|
|
|
|
| DHCP6 Server |
|
| You may choose to enable or disable DHCP6 Server. |
|
|
|
|
|
| DHCP6 Mode |
|
| You may choose Auto or Manual for the DHCP6 Server. |
|
|
|
|
|
Dynamic Host Configuration Protocol (DHCP) allows the individual PC to obtain the TCP/IP configuration from the centralized DHCP server. You can configure this router as a DHCP server or disable it. The DHCP server can assign IP address, IP default gateway and DNS server to DHCP clients. This router can also act as a surrogate DHCP server (DHCP proxy) where it relays IP address assignment from an actual DHCP server to clients. You can enable or disable DHCP server or DHCP proxy.
In the DHCP field, choose Disabled, the page shown in the following figure appears.
59