Field | Description |
Mask |
|
ISP | Enter the default gateway provided by your ISP. |
Gateway |
|
Connection | You can select LLC or |
Type | encapsulation mode is set to 1483 Bridged IP LLC. |
5.3.4.PPPoE/PPPoA
Select PPPoE/PPPoA, click NEXT, and the page as shown in the following figure will appear.
The following table describes the parameters in this page:
|
| Field |
|
| Description |
|
|
| Username |
|
| Enter the username for PPPoE |
|
|
|
|
| your ISP. |
| |
|
|
|
|
|
| |
|
| Password |
|
| Enter the password for PPPoE |
|
|
|
|
| your ISP. |
| |
|
|
|
|
|
| |
|
|
|
|
| Virtual path identifier (VPI) is the virtual path between two |
|
|
| VPI |
|
| points in an ATM network. Its valid value is between 0 and |
|
|
|
|
| 255. Enter the correct VPI provided by your ISP. By default, |
| |
|
|
|
|
|
| |
|
|
|
|
| VPI is set to 8. |
|
|
|
|
|
| Virtual channel identifier (VCI) is the virtual channel between |
|
|
| VCI |
|
| two points in an ATM network. Its valid value is between 1 |
|
|
|
|
| and 65535. Enter the correct VCI provided by your ISP. By |
| |
|
|
|
|
|
| |
|
|
|
|
| default, VCI is set to 35. |
|
|
| Connection |
|
| You can select LLC or |
|
|
|
| 46 |
|