Edimax Technology AR-7286WNB You can select None , Both , in Only or OUT Only, IPv6 Options

Field	Description
Gateway	You can enter the gate way IP for dial-up, which is
	provided by your ISP.
	Select whether to enable Network Address
	Translation (NAT) function. If you do not enable NAT,
NAT	you must add a route on the uplink equipment,
	otherwise Internet access will fail. Normally NAT is
	enabled.
Dynamic Route	You can select RIP1, RIP2-Bor RIP2-M.
Direction	You can select None, Both, IN Only or OUT Only.
	IGMP (Internet Group Multicast Protocol) is a
	session-layer protocol used to establish membership
Multicast	in a multicast group. The ADSL Router supports both
	IGMP version 1 (IGMP-v1) and IGMP version 2
	(IGMP-v2). Select Disabled to disable it.
IPv6 Options
IPv6 Address	Set Static IPv6 address.
IPv6 Default	Set Static IPv6 Gateway.
Gateway
IPv6 DNS Server1	Set Static IPv6 DNS1.
IPv6 DNS Server2	Set Static IPv6 DNS2.
	You may enable or disable MLD Proxy. MLD proxy is
MLD Proxy	enabled only for route mode. It works in an IPv6
	environment.
Dual Stack Lite
	You may Enable or Disable the Dual Stack Lite. The
Enable	ADSL Router support IPv4/v6 Dual Stack Internet
	Protocol.

Select PPPoA/PPPoE in the ISP encapsulation if your ISP requires you to use a PPPoE connection. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE

53