Edimax Technology AR-7286WNB user manual LED Status & Button Definitions, Front Panel

Page 6

Do not put this device close to heat sources or high temperatures. Keep the device out of direct sunshine.

Do not put this device close to a place where it is damp or wet. Do not spill any fluid on this device.

Do not connect this device to any PCs or electronic products, other than those which you are instructed or recommended to do so in the product’s documentation, by our customer engineers or by your broadband provider – connecting to incorrect devices may cause a fire risk.

Place this device on a stable surface.

1.4. LED Status & Button Definitions

Front Panel

LED

Color

Status

Description

Power

Green

On

ADSL2+ router is on.

Off

ADSL2+ router Is off.

Red

On

ADSL broadband initial self-test failed or upgrading

firmware.

ADSL

Green

On

ADSL line is synchronized and ready to use.

Slow Flashing

ADSL synchronization failed ( please refer to

Note i. below)

Quick Flashing

ADSL negotiation is in progress.

6

Image 6

Contents AR-7286WnA / AR-7286WnB Copyright Contents Trouble Shooting Package Contents Safety PrecautionsSystem Requirements LED Status & Button Definitions Front PanelWPS Rear Panel Features  DMZ QOS Connect the Adsl line Connect the router to your LAN networkConnect the power adapter to the router ConfigurationCheck the Adsl LED status Firewall settings PC LAN IP configurationPage Page Page Windows Windows 7, Windows Vista and Windows XPPage Page Windows Windows Vista Windows XP Page EZmax Setup Wizard Setup WizardPlease select your product Page Page Page Internet Connection Type PPPoE/PPPoA Bridge Mode Dynamic IP Address Static IP DescriptionPPoE/PPPoA VPIVCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade AdsltyperoutervcmuxPage Accessing the Router StatusDevice Info System Log Statistics Ethernet StatisticsAdsl Statistics Quick Start Wlan StatisticsPage Auto setup by ISP list Field Description ISPDynamic IP Address Bridge Mode Static IP AddressPPPoE/PPPoA Interface Setup InternetATM CBR, UBR, rtVBR, or nrtVBRMBS PCRSCR Select IPv4 , IPv4/IPv6 or IPv6IPv4 Address VC-Mux,1483 Routed IP LLCIPoA or 1483 Routed IP VC-MuxYou can choose Activated or Deactivated NATIPv6 Address Dual Stack LiteIPv4 Options You can select None , Both , in Only or OUT Only IPv6 OptionsSelect Activated or Deactivated Field Description Connection Setting Recommended Connect On-Demand or Connect ManuallyYou can select None, Both, in Only or OUT Only Field Description Dual Stack Lite You can choose 1483 Bridged IP LLC or 1483 BridgedLAN Dhcp Select Enable or Disable You may choose ManagedAddr or Other ConfigPage Wireless Field Description Access Point SettingsYou may choose Activated or Deactivated 802.11b+g, 802.11n, 802.11g+n or 802.11b+g+n 11n Settings Multiple SSIDs SettingsEven numbers only Select from Disabled , WEP-64Bits , WEP-128Bits Advanced SetupWPS Settings Wireless MAC Address FilterFirewall RoutingNAT Address Mapping for Multiple IP Service DMZ Field Description Overload , Many-to-Many No Overload , or Server QoSChoose the One-to-One , Many-to-One , Many-to-Many IP Version IPv4Field Description Quality of Service RuleMAC Dscp Select Low , Medium , High or HighestIP Version IPv6 IPv6 You may select Activated or Deactivated . Activated mustVlan Page Adsl Vlan IDAccess Management ACLChoose Annex a , Annex I , Annex A/L , Annex M or Filter Support Web , FTP , Telnet , Snmp , Ping or AL LSupport IP / MAC Filter, Application Filter and URL FilterChoose Both, Incoming or Outgoing Ymsg ICQMSN URL FilterSnmp URLUPnP Ddns CwmpURL for the CPE to connect to the ACS using the CPE WAN Maintenance AdministrationTime Zone Firmware Upgrade SysRestartDiagnostics Question Answer 255.255.255.0, respectivelyEU Declaration of Conformity Weee Directive & Product DisposalDeclaration of Conformity