Westell Technologies 2400 manual Service Configuration

User Guide 4-Port Router (Model 2400)

7.3 Service Configuration

To use an application that utilizes the NAT (Network Address Translation) protocol, you will have to configure your Router’s NAT settings. Select Configuration Service from the Configuration menu.

Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your Router are open and that the required application traffic can pass through your LAN. For a list of supported NAT services, go to section 9.8 (NAT Services).

This screen allows you to attach a predefined NAT service to your default profile. Once you have selected a NAT service, click on enable. This will display the Load New NAT Configuration screen.

030-300331 Rev. A 32 October 2002