Westell Technologies 2400 manual Status, Connection Summary

User Guide	4-Port Router (Model 2400)
Connection Name	This field allows you to enter a new connection name of your choice (up to 64
	characters).
Account ID	Use the same account ID that you used in section 7 if you are connecting to the
	same Service Provider. If you have multiple Service Providers, you can enter this
	information at this time.
Account Password	Use the same account password that you used in section 7 if you are connecting
	to the same Service Provider. If you have multiple Service Providers, you can
	enter this information at this time.
NAT Profile	Westell recommends that you use the Default parameter.
Manual	Selecting this feature allows you to manually establish your PPP session.
On Demand	Selecting this feature allows the Router to automatically re-establish your PPP
	session upon demand.
Always On	Selecting this feature allows the Router to establish an “always-on” PPP session
	if it goes down.
Time Out Enable	Selecting this feature allows you to enable the timeout parameter of your PPP
	session, which is set to a factory default of 20 minutes.
Save Password	Selecting this feature allows you to save the password for your new connection
	profile in your Router so that you will not have to re-enter it in case of a re-boot.
Minutes for Connection Time Out	This option allows you to specify the number of minutes that you want a PPP
	session to stay active before it is disconnected due to inactivity. (This feature
	works if you have selected the Time Out Enable feature explained above.)

9.2Status

Connection Summary

The following settings will be displayed if you select Connection Summary from the Status menu.

030-300331 Rev. A 41 October 2002