Westell Technologies 2400 manual User Guide

User Guide 4-Port Router (Model 2400)

The following screens show you how to add NAT services if you select enable from the Service Configuration screen.

Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your Router are open and that the required application traffic can pass through your LAN. For a list of supported services, please go to section 9.8 (NAT Services).

From the selection provided, click on the service name of your choice. Next, click on enable in the Service Configuration screen.

Click on OK in the Load new NAT Configuration? screen. This will load the new NAT Configuration and the settings will automatically be saved.

NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to your profile, you must first select the new NAT service. Next, load the new NAT Configuration, as explained above.

030-300331 Rev. A 62 October 2002