Westell Technologies 2400 manual Change Password

User Guide	4-Port Router (Model 2400)
TCP/UDP* only)	The following identifiers may be displayed in this field:
	ICMP Type-Messages that are identified by a type field.
	ICMP Code-ICMP messages that have a code assigned to them.
	IGMP Type: Messages that are identified by a type field.
	IGMP Code: IGMP messages that have a code assigned to them.
Destination Port	Destination Port of the packet that was logged.
(for TCP/UDP* only)	The following identifiers may be displayed in this field:
	ICMP Type-Messages that are identified by a type field.
	ICMP Code-ICMP messages that have a code assigned to them.
	IGMP Type: Messages that are identified by a type field.
	IGMP Code: IGMP messages that have a code assigned to them.
TCP Flags	Reported error flags for TCP
*NOTE: TCP and UDP protocols carry Data. ICMP protocols contain only control messages for the TCP/IP.

To clear the Firewall log, click Clear Log in the Firewall Log screen. The following pop-up screen will be displayed. Click OK when asked “Do you wish to clear the Firewall log file?” If you click Cancel, the firewall log will not be cleared.

To obtain a printable format of the Firewall Log, at the Firewall Log screen, click Printable/Savable Format. This will allow you to send a copy of the Firewall log to your designated printer.

Change Password

The following settings will be displayed if you select Change Password from the Maintenance menu. After you enter your data into the appropriate settings, click on change.

030-300331 Rev. A 80 October 2002