User Guide |
6. INSTALL THE USB DRIVERS
This section explains how to install the USB modem drivers for the
Before you begin the USB driver installation, you must determine which operating system is installed on your PC. To view information about your operating system, go to the ‘My Computer’ icon located on your desktop and then right click. Next, select ‘Properties’ from the options displayed, the ‘System Properties’ box will appear. At the ‘System Properties’ box, click on the ‘General’ tab. This will display the ‘System Properties’ for your PC, including the operating system installed on your PC (e.g. Microsoft Windows 98).
6.1 Westell CD-ROM Installation:
1.Place the Westell
2.Go to the USB driver installation section that matches your operating system and follow the procedures outlined in that section.
3.Verify the connection to the computer by observing the state of the USB LED. Once the USB drivers have been installed, the USB LED should be solid green. Solid green indicates a USB connection has been established. Refer to Table 1 (LED States and Descriptions) in section 4.4 of this User Guide.
6.2 Installing the USB Drivers for Windows 98
!
IMPORTANT: Confirm that the Westell USB Driver
1.After you have connected the Router to your PC, the New Hardware Found window appears See Figure 5. In a few moments, the Add New Hardware Wizard window will open. See Figure 6. Click Next.
Figure 5. Windows 98
12 | October 2002 |