Westell Technologies 2400 manual Public LAN Configuration, Check Private LAN Dhcp Settings

User Guide 4-Port Router (Model 2400)

If you clicked on save, the following pop-up screen will be displayed. Click on OK. This will save you Private LAN Configuration settings. If you click Cancel, your new settings will not take affect.

NOTE: DHCP Lease Time is displayed in the following format: (dd:hh:mm:ss)* This value must be greater than 10 seconds. The default = 01:00:00:00. Seconds must be between 0 and 59, minutes must be between 0 and 59, and hours must be between 0 and 23.

*(dd = days, hh = hours, mm = minutes, ss = seconds).

If the settings you have entered in the Private LAN Configuration screen are incorrect, the following warnings messages may be displayed via pop-up screens. If this occurs, check the settings in the Private LAN Configuration screen.

Warning Message	Check Private LAN DHCP Settings
Start Address is not part of the Subnet	Check the value in the DHCP Start Address field
End Address is not part of the Subnet	Check the value in the DHCP End Address field
End Address is below the Start Address	Check the value in the DHCP End Address field
Lease time must be greater than 10 seconds	Check the values in the DHCP Lease Time fields
Seconds must be between 0 and 53	Check the Seconds value in the DHCP Lease Time field
Minutes must be between 0 and 59	Check the Minutes value in the DHCP Lease Time field
Hours must be between 0 and 23	Check the Hours value in the DHCP Lease Time field

Public LAN Configuration

The following screen will be displayed if you select Public LAN from the Configuration menu. The Public LAN feature, if available from your service provider, allows the Router to use LAN IP addresses that are accessible from the WAN. Public LAN allows your computer to have global addressability.

NOTE: Both Private LAN and Public LAN cannot be disabled.

030-300331 Rev. A 53 October 2002