User Guide | |
|
|
| VC x PPPoE Settings |
IP Address | Displays the IP network address that your modem is on. |
Gateway | Displays the router IP Gateway address |
DNS Primary | Provided by your Service Provider |
DNS Secondary | Provided by your Service Provider |
MRU Negotiation | Factory Default = DISABLED |
| If ENABLED, the Maximum Received Unit (MRU) would enforce MRU |
| negotiations. (NOTE: enable this option only at your Internet Service Provider’s |
| request.) |
Tunneling | Factory Default = ENABLE |
| If ENABLED, this option allows PPP traffic to be bridged to the WAN. This feature |
| allows you to use a PPPoE shim on the host computer to connect to the Internet |
| Service Provider, by bypassing the Router’s capability to do this. |
NOTE: The values for IP Address, Gateway, DNS Primary, and DNS Secondary are all “Override of the value obtained from the PPP connection,” They default to “0.0.0.0,” in which case the override is ignored. Westell recommends that you do not change these values unless you are instructed by the Internet Service Provider.
If you have made any changes to your VC settings, you need to save them. To save the new VC settings, click on OK when asked Set this PPPoE VC configuration? If you click on cancel, the new VC settings will not be saved.
DNS Configuration
The following settings will be displayed if you select DNS Configuration from the Configuration menu.
| 46 | October 2002 |