Westell Technologies 2400 manual Troubleshooting System Self Tests, Connection/Status, Ppp

User Guide 4-Port Router (Model 2400)

9.6Troubleshooting

System Self Tests

The following settings will be displayed if you select System Self Tests from the Troubleshooting menu. Click on test to run a diagnostic test on your Router’s connection.

	Connection/Status
DSL	The Router checks the status of the Router connection.
	Possible responses are:
	UP: The Router is operating correctly and has obtained synchronization with the
	opposing network device.
	DOWN: The Router is operating correctly, but has not synchronized with the
	opposing device.
PPPoE	Indicates that a PPPoE session is or is not established.
	Possible responses are:
	Session UP: A valid PPPoE session has been detected.
	No Session: Currently there is no active PPPoE session established.
	Initiating Session: A PPP session must be connected from the homepage screen.
PPP	Indicates that a PPPoE or PPPoA session must already be established.
	Possible responses are:
	Connection UP: The Router has established a connection
	No Connection: There is no PPP connection
	Initiating Connection: The PPP connection process has been initiated
	Connection Halted: A successful PPP connection was halted
	Cannot Connect: A PPP connection could not be made because of a PPPoE session
	failure.
	Authorization Failure: The user name or password is incorrect.
030-300331 Rev. A	87	October 2002