Hughes ThurayaIP warranty Net Ip

Page 28

and the Access Point Name (APN) information configured by your Service Provider. You are also given the ability to make changes.

Note: Generally your Service Provider has already performed this configuration step for you. Whenever you modify the addresses on the Network Settings screen, you must press SAVE and exit the wMMI, reboot your computer, and power the ThurayaIP off and then back on so that the new settings can take effect.

NET IP:

Obtain Address Automatically: If this button is selected, ThurayaIP uses an IP address automatically assigned by the network during the period when the Modem connects to the network.

Statically Configure Address: If this button is selected, the Modem uses the IP address you enter in the Static Public Network IP Address field. You should check this box and enter an IP address only if directed to do so by your Service Provider.

DNS:

Obtain DNS Address Automatically: If this button is selected, ThurayaIP uses a Primary Host Domain Name Service (DNS) automatically assigned by the network during the period when the Modem connects to the network.

Statically Configure Address: If this button is selected, the Modem uses the DNS address you enter in the DNS Address field. You should check this box and enter an IP address only if directed to do so by your Service Provider.

APN Selection: If use of multiple Internet Service Providers is required, you can modify the current Access Point Name (APN) value. You should modify these fields only if directed to do so by your Service Provider. The choices are the following: Streaming-CBR,Refill, <BLANK> (enter the desired name) and Disabled.

SAVE/ CANCEL: If you want the values you have entered to be processed, click the SAVE button, exit the wMMI, and reboot your computer. You will also need to turn ThurayaIP off and then on again so that the new settings can take effect. If you want the values you have entered to be ignored, click the CANCEL button and the Network Settings remain as they were with no reboot required.

SECURITY MANAGEMENT SCREEN

The Security Management screen allows you to impose a tighter level of security on your ThurayaIP.

20

ThurayaIP Satellite Modem User Guide

Page 27 Page 29
Image 28
Page 27 Page 29
Contents ThurayaIP User GuidePage Safety Information Do not stand in front of the Antenna Properly ground the AntennaDo not operate during Electrical Storms GeneralQualified service Batteries and accessoriesBattery Door Connecting devicesPacemakers Hearing aidsContents Troubleshooting First Time Set-Up IntroductionUnpacking Software Installation and Configuration Setting Up the ModemSIM Insertion Orientation DC Power JackGPS Satellite Icon Location on Display Data Connections USB and Ethernet Data Connection LocationsHome Page Satellite Location Display Receive Signal Strength on the ThurayaIP Display Quick Reference Global Positioning System OperationIntegrated Man Machine Interface iMMI IMMI Button LocationsDisplay Description Comment Audible Pointing Indicator Power Icon Battery IconWireless LAN Icon Web Man Machine Interface wMMI Screens Globe IconHome Screen Properties Screen Statistics Screen Connection Management Screen Status Screen Network Settings Screen NET IP Security Management Screen Wlan Configuration Screen Wlan Security Screen Advanced Settings Screen Select the Save button to implement your modifications ThurayaIP Satellite Modem User Guide Upgrading Thurayaip Troubleshooting General TroubleshootingService Provider ThurayaIP cannot YOU MAY Need to Recheck this Problem Possible Cause Action Number Cause Solution Description Status CodesSIM card access has Number Cause Solution Description Failure N-SAPI has already Number Cause Solution Description ThurayaIP is ThurayaIP is in a Number Cause Solution Description Number Cause Solution Description Ggsn Number Cause Solution Description Glossary ThurayaIP Satellite Modem User Guide Index
Top Page Image Contents