28 Chapter 4 Web-based Management
sites until the DNS settings are properly configured. Be sure to configure this before you save the new settings and restart the UT-300R2.
7When you are satisfied that all the WAN settings are configured correctly, click on the Apply button.
The new settings must be saved and the UT-300R2 must be restarted for the settings to go into effect. To manually save and reboot the UT-300R2, click on the Tools directory tab and then click the System menu button. On the menu that appears, click he Save & Restart button. The UT-300R2 will save the new settings and restart. Upon restarting the UT-300R2 will automatically establish the bridged WAN connection.
Dynamic IP Address for the WAN Connection
When the UT-300R2 is configured to use Dynamic IP Address assignment for the WAN connection, a server on the ISP’s network assigns the global IP address settings used for the WAN connection. This is method is simply Dynamic Host Control Protocol (DHCP) for the WAN. The UT-300R2 can be configured to be a DHCP client and obtain its IP settings automatically from the DHCP server maintained by your ISP. Follow the instructions below to configure the UT-300R2 to use Dynamic IP Address assignment for the WAN connection.
