UTStarcom UT-300R2 manual Mac

Page 53

Chapter 5 Advanced Configuration / Network Management

51

From the Protocol drop-down menu, select the protocol that you want this rule to apply to. You can select from the TCP, UDP, ICMP, or Any protocols. If Any is selected, this rule will apply to any packets that has one of the specified IP addresses as its source or destination.

You can also specify a range of TCP or UDP ports for this rule to apply to in the Port Range fields.

The Schedule field allows you to specify when the UT-300R2 router will enable this rule. Click always if you want this rule to be enabled at all times. Otherwise, click the from radio button and enter the time and day of the week you want this rule to be enabled.

Click the Apply button to enter the rule into the IP Filters List and restart the router.

Directory

Configuration and Read-only Menus

 

 

 

This radio button selects the IP address filter rule

IP Filters

entry page, which will be displayed when you click

 

on it.

 

 

MAC

This radio button selects the MAC address filter

rule entry page, which will be displayed when you

Filters

click on it.

 

 

 

URL

This radio button selects the URL filter rule entry

Blocking

page, which will be displayed when you click on it.

 

 

Domain

This radio button selects the Domain name filter

rule entry page, which will be displayed when you

Blocking

click on it.

 

 

 

Status

This set of radio buttons allows you to enable or

disable this rule.

 

 

 

Name

You can enter a name for the rule, for easier

identification later.

 

 

 

Image 53
Contents UT-300R2 ADSL2/2+Modem United States Government Legends Contents UT-300R2 Status Information Attachments Device Introduction OverviewDevice Appearance FeaturesOverview Packing List Installation PlanningFront Panel Interfaces IntroductionRear Panel Connecting the Adsl LineCable Connections Connecting the UT-300R2 to the Ethernet LAN Computer to UT-300R2 Connection Hub or Switch to UT-300R2 ConnectionPower on Installation Planning Set up TCP/IP on Your PC Before Configuring UT-300R2Configure IP Settings on Your PC Set up Proxy ServiceFirst Time Log on Summary Web-based ManagementWeb-based Management Options of Web-based Configuring the WAN ConnectionWeb-based Management WAN Setting − Add menu Configuring a Bridged Connection for the WANDepending on which WAN Type and Connection Type you select Web-based Management Configuring a Routed/Bridged Connection for the WAN WAN Settings Menu Routed/Bridged Mode Configuring a PPP Connection for the WAN Web-based Management Dynamic IP Address for the WAN Connection Web-based Management Static IP Address for WAN Web-based Management Dhcp Configuration Dhcp Server Settings for the LAN Disabling the Dhcp Server DNS Server SettingUse the UT-300R2 for Dhcp Configuring the LAN Connection Web-based Management Save New Settings Web-based Management Advanced Configuration / Network Management Advanced configuration menus NAT Virtual Server ConfigurationAdvanced Configuration / Network Management Advanced Configuration / Network Management Directory Configuration and Read-only Menus Special Application Configuration Directory Configuration and Read-only Menus This is the TCP or UDP port number that will be used Configure a Filter Rule-IP Filters Advanced Configuration / Network Management Advanced Configuration / Network Management MAC Select Allow to permit packets to pass through Configuring a Filter Rule- MAC Filters Advanced Configuration / Network Management Directory Configuration and Read-only Menus Configuring a Filter Rule-URL Blocking Advanced Configuration / Network Management Directory Configuration and Read-only Menus Configuring a Filter Rule-Domain Blocking Advanced Configuration / Network Management This radio button selects the URL filter rule Firewall Firewall Configuration MenuAttacks Port Scans DMZ Ddns RIP Tools Administrator’s SettingsAdministrator Settings Menu Configure System TimeSave UT-300R2 Configuration Settings Save Configuration File to PC System Settings Load Saved Configuration FilesFirmware Update Restore Factory Default SettingsTools Log UT-300R2 Status InformationTraffic Statistics Traffic StatisticsDiagnostics DiagnosticsAttachments Technical SpecificationsSafety and Environmental Tftp Glossary Attachments