1From the WAN Setting page, select the PVC you want to configure from the seven available PVCs, using the drop- down menu.
2You can also specify the VPI/VCI numbers (assigned to this PVC by your ISP) that will be used to uniquely identify this PVC to your ISP. You can also enter of modify these two numbers later during the configuration process.
3Click the Add button, at the bottom of the page, to add the new configuration to the list of active PVCs. This will open the WAN Setting configuration screen, shown above.
4Click to select the RFC2684Bridged radio button listed in the WAN Type options list. The menu will change to offer a different set of configuration options, as shown above.
5Select the Connection Type from the options to be Static IP, by clicking the radio button.
