UTStarcom UT-300R2 manual This is the TCP or UDP port number that will be used

Chapter 5 Advanced Configuration / Network Management 47

Directory	Configuration and Read-only Menus
	This is the TCP or UDP port number that will be used
	to initiate a connection from the LAN to the WAN
Trigger	(internet) from a PC on your LAN that is running this
	application. The entry can be either a single port
Port
	number or a range of port numbers. Consult your
	application documentation to determine the port
	numbers that should be included.
Trigger	This is either the TCP or UDP protocol, that the
	application uses to establish connections between
Type
	PCs.
	This is the port number on the WAN (internet) that will
Public	be used to access to this application. This can be
Port	either a single port number or a range of port numbers.
	Use a comma to add multiple ports or port ranges.
	This is the TCP or UDP port number that will be used
Public	to initiate a connection from the WAN (internet) to a PC
	on your LAN that is running this application. The entry
Type	can be either a single port number or a range of port
	numbers. Consult your application documentation to
	determine the port numbers that should be included.

Click the Apply button to put the new virtual server configuration set or modification into effect. Any Special Application configured in the menu will appear in the Special Applications List with the new settings. The UT-300R2 must save the new settings and reboot before the new Special Applications configurations are applied.

To remove any configuration set from the Special Applications List, click on the trashcan icon for set you want to delete.