RAD Data comm IPmux-16 operation manual Power Physical

Chapter 1 Introduction IPmux-16Installation and Operation Manual

Power

Physical

Environment Humidity

Ethernet Port:

LINK	OFF when line is not active
	ON when line is OK
ACT	OFF when no activity
	ON when a frame is being transmitted or
	received on the line
FDX	OFF when half duplex
	ON when full duplex
100M	OFF when 10 MHz
	ON when 100 MHz
E1/T1 Port:
SYNC	ON when the port is synchronized (no alarm)
	OFF when signal loss, LOF or AIS is detected
	(local alarm)
	BLINKS when RDI is detected (remote alarm)

Note: All LEDs are green and ON after power-up.

1 or 2 power supplies

40W, 100 to 240 VAC, 50/60 Hz –36 to –72 VDC (–48 VDC nominal)

Height 6.6 cm / 2.55 in (1.5U) Width 43.2 cm / 19 in Depth 35 cm / 13.78 in Weight 4.0 kg / 8.8 lb

Temperature: 0 to 45°C / 32 to 110°F Up to 90%, non-condensing

1-18 Technical Specifications