RAD Data comm IPmux-16 operation manual Ascii Terminal Configuration, All other Alarms are unused

IPmux-16Installation and Operation ManualChapter 3 Operation

	Table 3-2.	IPmux-16 Alarms (Cont.)
Alarm ID	Alarm Description	Trap Sent to NMS	Dry Contact
21	Far End Block Error (FEBE Line Layer)	Alarm FEBE	Major
		1.3.6.1.4.1.164.6.1.3.0.12
26	Local Connectivity Fail	Local Conn Status Trap	Minor
		1.3.6.1.4.1.164.6.1.3.0.13
27	Remote Connectivity Fail	Remote Conn Status Trap	Minor
		1.3.6.1.4.1.164.6.1.3.0.14

Main Menu

↓

2. Configuration

↓

1.General Configuration

↓

2.ASCII Terminal Config.

All other Alarms are unused.

ASCII Terminal Configuration

➤To configure the ASCII terminal

• Type 2 (ASCII Terminal Config.) in the General Configuration menu.

	ASCII Terminal Configuration
1.	Display Mode		Color
2.	Baud Rate [bps]		19200
3.	Change Password
4.	Hard flow ctrl (RTS/CTS)		Off
ESC. Exit
Select item from the menu:_
	Figure 3-18. The ASCII Terminal Configuration Menu
Display Mode:		Color / MonoChrome 3 color / MonoChrome 2 color
Baud Rate		9600 / 19200 / 38400 / 57600 – in units of bps
		Default: 19200
Change Password		Choose this option to enter a menu that allows the
		user to change the current password
Hard flow ctrl		Set the 15 minute timeout to On or Off
		When On the terminal will exit to the password screen
		if no characters were sent by the terminal for
		15 minutes.

Configuring IPmux-16 3-17