F-60+ Operation and Maintenance Manual
CAUTION
Use only 80% isopropyl alcohol or a rubber cement eraser to clean the laminating rolls.
Harsh chemicals like toluene, acetone or MEK
destroy the silicone covering of the rolls.
CAUTION
Raise the upper main roll when the laminator is not in operation. Prolonged contact can damage the rolls.
CAUTION
Excess pressure can damage the laminating rolls. Always select the minimum roll pressure necessary to complete the task.
CAUTION
If silicone adhesive contacts the upper or lower
roll, remove it IMMEDIATELY using 80%
isopropyl alcohol. It can harden within an hour
and ruin the roll.
WARNING
The operating environment must be free of dust,
flammable liquids and vapors. You can be injured by inhaling chemical vapors. Vapor build up or stored flammable liquids can cause a fire. Excessive dust can damage the laminator.
CAUTION
Do not use a knife or other sharp instrument
during installation or while servicing the
laminator. You can cause irreparable damage to
the rolls.
WARNING
Do not attempt to move the laminator across anything other than a flat, level surface without trained and qualified riggers. You can be crushed or seriously injured.
The
of equipment. It is necessary to employ LICENSED RIGGERS ONLY to move the machine. GBC
GBC
WARNING
Do not operate the laminator if the power cord is damaged or frayed. You can be severely shocked, electrocuted or cause a fire. Contact a qualified electrician to replace the cord.
WARNING
Do not allow anything to rest on the power cord. Do not locate the cord where people can walk on it. You or others can be severely shocked, electrocuted or cause a fire.
Always use good safety practices when operating or servicing the laminator and know how to react quickly
&DXWLRQin an emergency:DUQLQJ. /DEHO/RFDWLRQV
Posted at various locations on your
© GBC |