GBC 930-028 manual Quantity, Part Description

5HSODFHPHQW3DUWV			Number		Quantity
F-60+ Operation and Maintenance Manual					Specifications
6FWLRQ￿￿6SHFLILFDWLRQVDQG
				Table 6-2: Replacement Parts
			Part	Description	Recommended
Table 6-1: F-60+ Laminator Specifications
			001-374	Assembly, Force	1
Characteristic		Specifications		Gauge PCB
			001-505	Assembly, Force	1
Dimensions	Uncrated: 80" x 38.5" x 57"
(L x D x H)	(202 x 84 x 145 cm)			Sensor
	Crated: 90" x 44" x 68"
			001-515	Assembly, Control	1
	(202 x 84 x 145 cm)
				PCB
Weight	Uncrated: 1200 lbs (544 kg)
	Crated :1700 lbs (771 kg)		186-200	Fuse, SB, 3AG, 3A	3
Laminating Rolls	64" (163 cm) roll face with a
			214-313	Switch, Palm, E-stop	1
	high release surface, upper and
	lower rolls internally heated.
			230-007	Temperature Control	1
Laminating Material	Uses pressure sensitive materi-
			425-003	Motor	1
	als up to 62 inches (158 cm)
	wide and hot/heat activated
			690-059	Roll, Rubber	1
	materials up to 61 inches (155
	cm) wide on a 3-inch (7.6 cm)
			189-032	Heater, Round	1
	inside diameter core, maxi-
	mum roll diameter of 10 inches		230-006	IR Sensor	1
	(25.4 cm).
			860-014	Tube, Rewind Brake	1
Laminating Speeds	0 to 15 fmp (0 to 4.57 mpm)
	with variable speed, reversible		186-135	Fuse, 250V, 20A,	1
	action at slow speed (less than 3			Ceramic
	ft/min (1 m/min)), start and
			690-052	Roll, Pull, Upper	1
	stop controlled either through
	the instrument panel or with the
			690-053	Roll, Pull, Lower	1
	variable speed footswitch.
Heating	Capable of operating tempera-
	tures of up to 270 ºF (132 ºC).
Safety Features	•	Redundant circuit pro-
		tected safety shielding
	•	Mechanical guards protect
		main roll and pull roll nips
	• Four emergency stop but-
		tons
Installation	60A single phase, 220/230/240
Requirement	VAC or, in Europe, 3 Phase,
	240 VAC with 30 Amps per
	phase.

© GBC Pro-Tech 1999 April 6-1