Configure Additional Settings

4.Chassis Manager loads in your browser window.

Figure 1-10:Chassis Manager Opening Display for the Topspin 90 Server Switch

You can now fully manage the device with CLI over Telnet/SSH or the GUI.

1.Verify that you are running the latest version of software.

a.Refer to the Topspin support Web site: http://topspin.com/support/

b.Use the show version command in the CLI to show the current firmware version of your switch:

Password: xxxxx

Topspin-90> enable Topspin-90# show version

================================================================================

System Version Information

================================================================================

system-version : Topspin-90 TopspinOS 2.1.0 releng #117 06/18/2004 1

7:48:38

contact : support@topspin.com name : Topspin-90

location : 515 Ellis Street, Mountain View, CA 94043 up-time : 0(d):19(h):25(m):38(s)

last-change : Wed Jun 23 06:02:11 2004 last-config-save : Wed Jun 23 00:55:34 2004

action : none

result : none

Topspin-90#

2.(Optional) Configure time settings.

The Topspin 90 has internal clocks that are set at the factory.

You can also configure this manually or via NTP servers. If you do not want to configure the clock at this time, skip this step.

• In the Element Manager GUI, go to Maintenance-->Time. Enter your settings.