Cisco Systems SFS 3001 quick start Assigning an Address Dynamically Dhcp

Page 15

7

c.Enter the enable command.

Topspin-90> enable

Topspin-90#

d.Enter the configure command.

Topspin-90# configure

Topspin-90(config)#

e.Enter the interface mgmt-ethernet command.

Topspin-90(config)#interface mgmt-ethernet

f.Enter the IP address of the management port followed by the netmask.

Topspin-90(config-if-mgmt-ethernet)# ip address 10.10.0.22 255.255.255.0

g.Set the default gateway for the management port. For example:

Topspin-90(config-if-mgmt-ethernet)# gateway 10.10.0.1

h.Enable the management port by entering the no shutdown command.

Topspin-90(config-if-mgmt-ethernet)# no shutdown

i.Save the configuration to preserve it between reboots.

Topspin-90(config-if-mgmt-ethernet)# exit

Topspin-90(config)# exit

Topspin-90#copy running-config startup-config

Assigning an Address Dynamically (DHCP)

The Topspin 90 supports dhcp to assign the IP address.

a.When the system has completed booting, press <Enter> several times to display the CLI prompt.

Login:

b.Enter the user name and password. The default user name is super, and the default password is super.

Login: super

Password: super

Topspin-90>

c.Enter the enable command.

Topspin-90> enable

Topspin-90#

d.Enter the configure command.

Topspin-90# configure

Topspin-90(config)#

e.Enter the interface mgmt-ethernet command.

Topspin-90(config)#interface mgmt-ethernet

Image 15
Contents Part Number OL-7712-01 Product ID Page Contents Regulatory Notices Page Electrical Cautions FCC Statement Safety InformationPage Laser Cautions General CautionsLaser Specs Contact InformationPrepare the Site Topspin 90 Quick StartRequirements Install the Topspin 90 in an Equipment RackPrepare for the Installation Rack Mount InstallationSeparate Brackets 3Holding Rack Bracket Against Inside of Rack Install Expansion Modules Optional Cable the SwitchConnect Management Ports Configure Basic Connectivity Assigning an Address Dynamically Dhcp Enter the interface mgmt-ethernet commandTopspin-90config#interface mgmt-ethernet Topspin-90#copy running-config startup-configConnect and Configure InfiniBand Hosts Topspin-90#show interface mgmt-ethernet# mount /mnt/cdrom # cdmount ./tsinstall 7Fully Installed IB Cable with Pinch Connector Install the Element Manager GUILaunch Chassis Manager TopspinEMPrograms -Topspin Element Manager -TopspinEM Configure Additional Settings Layer 2 Bridging Procedure Optional Configure the Ethernet GatewayEnter interface gateway physical slot# Use the broadcast-forwarding commandEnter ifconfig eth# subnet# netmask # Enter interface ethernet slot/portConfigure the Fibre Channel Gateway Optional Topspin-90#configure terminalTopspin-90#show fc srp target Description keyword Discover-itl keyword Topspin-90#show fc srp initiatorSRP ITL Topspin-90#show fc srp itlGateway-portmask-policy keyword Page Index