Cisco Systems SFS 3001 quick start Launch Chassis Manager, TopspinEM

Page 19

11

300 Mhz processor

800x600 screen resolution, 16bit color depth

2.Insert the Topspin CD-ROM into the CD-ROM drive of a server that has network access to a Topspin management port.

3.Access the top folder of the CD-ROM. The GUI can be found in the following location on the CD-ROM.

Linux/install_linux_ia64.bin

Linux/install_linux_x86.bin

Windows/install_x86.exe

Solaris/install_solaris_sparc.bin

4.Run the installation wizard:

a.On Windows, double-click install.exe.

b.On Solaris and Linux systems, enter sh ./install_yourOS.bin.

5.Follow the on-screen instructions.

• Enter location and preference information as requested by the installation program.

6.Start the Element Manager.

a.On Linux platforms, change to the installation directory and run the Element Manager with

./TopspinEM.

b.On Windows platforms, click

Programs ->Topspin Element Manager ->TopspinEM.

c.When prompted to enter a device name, enter the DNS host name or IP address of the Topspin 90, and community string for the unrestricted user. The default community string for the unrestricted user is secret.

Launch Chassis Manager

To launch Chassis Manager, perform the following steps:

1.Launch your Web browser.

Chassis Manager supports the following browsers

Microsoft Internet Explorer version 6

Netscape Navigator version 6

Mozilla version 1.4

2.Type the Management IP address of your Server Switch in the address field of your browser and press Enter. (You configured the IP address in Step f.)

Figure 1-9:Web Browser Window

A log-in window opens.

3.Enter your Server Switch user name and password in the log-in window and click the OK button.

Image 19
Contents Part Number OL-7712-01 Product ID Page Contents Regulatory Notices Page Electrical Cautions FCC Statement Safety InformationPage Laser Cautions General CautionsLaser Specs Contact InformationPrepare the Site Topspin 90 Quick StartRequirements Install the Topspin 90 in an Equipment RackPrepare for the Installation Rack Mount InstallationSeparate Brackets 3Holding Rack Bracket Against Inside of Rack Cable the Switch Install Expansion Modules OptionalConnect Management Ports Configure Basic Connectivity Assigning an Address Dynamically Dhcp Enter the interface mgmt-ethernet commandTopspin-90config#interface mgmt-ethernet Topspin-90#copy running-config startup-configTopspin-90#show interface mgmt-ethernet Connect and Configure InfiniBand Hosts# mount /mnt/cdrom # cdmount ./tsinstall 7Fully Installed IB Cable with Pinch Connector Install the Element Manager GUITopspinEM Launch Chassis ManagerPrograms -Topspin Element Manager -TopspinEM Configure Additional Settings Layer 2 Bridging Procedure Optional Configure the Ethernet GatewayEnter interface gateway physical slot# Use the broadcast-forwarding commandEnter ifconfig eth# subnet# netmask # Enter interface ethernet slot/portTopspin-90#configure terminal Configure the Fibre Channel Gateway OptionalTopspin-90#show fc srp target Description keyword Discover-itl keyword Topspin-90#show fc srp initiatorSRP ITL Topspin-90#show fc srp itlGateway-portmask-policy keyword Page Index