Figure 3-4. Installing a Hot-Plug Hard Drive
1
2
3
1 | hard drive | 2 | drive carrier | 3 | drive carrier release handle |
bInsert the
cClose the handle to lock the drive in place.
4Replace the front bezel, if it was removed in step 1.
Replacing a Hard-Drive Carrier
Removing a Hard Drive From a Hard-Drive Carrier
1If you are removing a SATA hard drive from a SATAu drive carrier, remove the interposer card:
a Viewing the hard drive carrier from the rear, locate the release lever on the left end of the interposer card.
b Push the lever away from the carrier rail to release the left end of the card. c Rotate the left end away from the hard drive to release the connector.
d Pull the right end of the interposer card clear of the slots in the carrier rail.
2Remove the four screws from the slide rails on the
58