Updates to the User Guide
11.Based on the requirements of your switch, select the team type from the list.
Team Type | Description |
|
|
Adapter Fault | Provides for one active connection with the remaining connections in a standby |
Tolerance | state. |
|
|
Adaptive Load | The transmitted data is balanced across the team with one port acting as the |
Balance | receiver. |
|
|
Static Link | All ports act together presenting one MAC for throughput performance |
Aggregation (SLA) | increase. Switch must be configured for SLA before the team is created. |
| Note: Most contemporary switches support SLA. |
|
|
IEEE 802.3ad | All ports act together presenting one MAC for throughput performance |
Dynamic Link | increase. Switch must be configured with 802.3ad support. |
Aggregation |
|
|
|
12.Select OK to save your changes and close the configuration dialog box.
13.Close the Local Area Connection Properties dialog box.
70
Release Notes | 90990009 |