Spectra Logic NTIER700 manual BlueScale2.6.0.7, Known Issue

nTier700 BlueScale Firmware

BlueScale2.6.0.7

This release improves the overall reliability of the nTier700.

Resolved Issues

The File Migrator installation files have been added to system disk on the the 64-bit Windows version of the nTier700.

Note: As of BlueScale 2.7.1.7, File Migrator is no longer included with the nTier700.

Known Issue

Problem	Workaround
When RAIDs are rebuilding, the	If you need to determine the status of the RAID rebuild, do
Bluescale progress screen does not	one of the following:
update to reflect the actual progress,	ƒ	Monitor the BlueScale messages. The rebuild is complete
even when the process is nearly		when you see a message similar to this:
complete.		Raid <raid name> in Enclosure <Enclosure #>
Note: This issue is resolved in BlueScale
		Chassis <Chassis #> Hba <Hba #> Expander
2.7.1.7.		<Expander #> changed state from <previous
		state> to OK
	ƒ	Use the Windows command line to determine the status.
	1. Connect to the Windows desktop.
	2. Select Start > Accessories > Command Prompt to open a
		command prompt window.
	3. Type the following command:
		%ntiercurrent%\adaptec\arcconf.exe getstatus
		<ctrl #>
		where <ctrl #> is the number of the RAID controller on
		which the RAID was being rebuilt (either 1 or 2).
	4. Repeat Step 2 until the status returned is “None.”

16

Release Notes 90990019