Spectra Logic NTIER700 manual Select Start Update

Page 58

Updates to the User Guide

2.Select the firmware package you want to use. The selected package displays in the Update To field.

ƒThe most current available firmware package found during the scan displays in the Update to field. In Figure 22, the most current version is on the nTier firmware downloads page on the Spectra Logic web site.

ƒIf you want to install the firmware from a different remote package server, enter a valid URL in the Scan this web page for remote packages text field and click Save. The nTier700 scans the specified web page for available firmware packages.

Note: The default package server is the nTier firmware downloads page on the Spectra Logic web site.

ƒIf you want to use a different firmware version, use the Update To drop-down menu to display all of the available firmware package files at each location.

Important Do not install a package that is older than the currently installed version unless you are specifically instructed to do so by Spectra Logic Technical Support.

3.Select Start Update.

A progress page shows the step-by-step progress of the update. Information about the firmware update progress also appears in the Messages page. The update may take several minutes to complete.

58

Release Notes

90990009

Image 58
Contents Spectra nTier700 Copyright Trademarks June Contacting Spectra Logic Spectra Logic Sales United States and Canada EuropeContents Updates to the User Guide Related Publications NTier700Microsoft Windows Operating System and Software Spectra nTier File MigratorUser Feedback Register Your NEW NTIER700 Typographical ConventionsRelease Notes 90990019 Firmware Package Support Firmware Package InformationFirmware Version Requirements Updating FirmwareFirmware Package History BlueScale Resolved IssuesBlueScale2.8.0.1 Enhancements and ChangesAccessories Remote Desktop to display Known IssuesProblem Workaround ConnectBackup and Archive Appliance User Guide for Known Issue BlueScale2.6.0.7Start Settings Network Connections BlueScale2.6.0.6Described in the nTier File Migrator User Guide Following error, which corresponds to the Remote Accessories Command Prompt Keyboard. For example, after entering the folder Release Notes 90990019 Supported Browsers IP AddressingWindows Operating System Obtain the Updated Device DriverUpdating Tape Drive Device Drivers Select If your organization Run the following command If you are using Install the Updated Device DriverFor this device Uninstall Remove Current Drivers or DevicesWorking with the Hardware Components Moving or Shipping the NTIER700 Recycling Your NTIER700Features OverviewInstall in a Restricted Access Location Installing the NTIER700Connect the Power Cords Install the Data Drives in the Blades Unlock the BladesInstall the Data Drives Identifying the drive numbers and latches in a bladeDrives for a single blade Release the drive sled latch Connect the Cables and Power On Connectors on the rear panel N+1 power configuration shownFibre Channel GigEConnected Scsi busƒ Read -Configuring the nTier700 on page 40 Next StepsAccess the BlueScale Web Interface Configuring the NTIER700Https//nnn.nnn.nnn.nnn When using Internet Explorer or Firefox Add Security Exception dialog box, select Get Certificate Release Notes 90990009 Access the Windows Desktop OverviewConnect and Log Windows Desktop messageWindows Storage Server login Log Off and Return to BlueScale Windows Storage Server Remote DesktopInstall Additional Application Software Install Antivirus SoftwareMake the Installation Files Accessible to Windows Share a CD or DVD Drive on a Remote Computer Share the DriveMap the Shared CD or DVD Drive to a Drive Letter Install the Software Using the NTIER700 Using the Blade Operator PanelDisplaying the Status of Components Maintaining the NTIER700 Moving or Shipping the nTier700Check the Current Firmware Version Determine Whether an Update is Available Current BlueScale version on the About menuDownload the Updated Firmware ThenUpdate the Firmware Select Start Update Choose Continue Install CancelUpdating Tape Drive Device Drivers Restart the nTier700 Installnonexclusive.exe Before Contacting Spectra Logic Technical Support Appendix A-SERVICE and SupportOpening a Support Ticket Parameter Specification RAID Storage SpecificationsAppendix B Specifications ReturnsPower Cords Volt AC power cord are as followsAppendix D-TUNING Gigabit Ethernet Network Performance Enable Jumbo Frames for 10 GigE Network Interface CardsChange the MTU Setting for the NIC Card Local Area Connection Properties Enable Window Scaling DecimalTeaming NICs Static Link Team Type DescriptionAggregation SLA