7
74(86) | Control keypad |
Download parameters to drive (From keypad, S6.5.2)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided that the drive is in STOP status.
Enter the From keypad page (S6.5.2) from the Parameter copy menu. Push the right arrow menu button to enter the edit mode. Use the Browser buttons to select either the option All parameters or Application parameters and press the Enter button. Wait until 'OK' appears on the display.
The procedure to download the parameters from keypad to drive is similar to that of from drive to keypad. See above.
Parameter sets (S6.5.3)
The NX frequency converter features a possibility for the user to store and load two customised parameter sets (all parameters included in the application) and to load back the factory default parameter values.
On Parameter sets page (S6.7), push the right arrow menu button to enter the Edit menu. The text Select begins to blink allowing you to choose any of the storing or loading functions with the Browser buttons. You can store or load two customised parameter sets or load back the factory defaults. Confirm with the Enter button. Wait until 'OK' appears on the display.
READY | READY | enter | CONFIRM | |
I/Oterm | I/Oterm | |||
|
| |||
Parameter sets | Parameter sets |
|
| |
Select | Store Set1 |
| CANCEL | |
READY | READY |
|
| |
I/Oter m | I/Oterm |
|
| |
Parameter sets | Parameter sets |
|
| |
Wait... | OK |
|
|
Figure 7-20. Storing and loading of parameter sets
Parameter backup (P6.5.4)
On this page the user can activate or inactivate the parameter backup function. Enter the edit mode by pressing the right arrow menu button. Choose Yes or No with the Browser buttons.
When the Parameter backup function is activated the NX control keypad makes a copy of the parameters of the presently used application. When applications are changed, the user will be asked if they wish the parameters of the new application to be uploaded to the keypad. For this to happen, push the Enter button. If a copy is required of the parameters of the previously used application saved in the keypad push any other button. The user will be able to download these parameters to the drive following the instructions given in chapter 7.3.6.5.