Nx Networks NX series user manual 7686, Information submenu

7

76(86) Control keypad

7.3.6.7Information submenu

In the Information submenu (S6.7) frequency converter-related hardware and software information as well as operation-related information, can be found.

Enter the Info menu by pressing the right arrow menu button. The user can now browse through the information pages with the Browser buttons.

Page	Content
6.7.1	Nominal power of the unit (constant torque)
6.7.2	Nominal voltage of the unit
6.7.3	Control board software version
6.7.4	Application interface version of the software
6.7.5	Expander board statuses and program versions
6.7.6	Application-related software information
6.7.7	Debug menu (for advanced users)

Table 7-6. Information pages

Expander board information (S6.7.5)

Information about the basic and option boards connected to the control board can be found in the Expanders submenu (see Chapter 6.2).

You can check the status of each slot by entering the board submenu with the right arrow menu button and using the Browser buttons to choose the board whose status you wish to check. Push the right arrow menu button again to display the status of the board. The keypad will also display the program version of the respective board when either one of the Browser buttons is pushed.

If no board is connected to the slot the text 'no board' will be shown. If a board is connected to a slot but the connection is somehow lost the text 'no conn.' is displayed. See Chapter 6.2 and Figure 6-12 and 6-11 for more information.

For more information on the expander board-related parameters, see Chapter 7.3.7.

	R EADY
	I/Oterm	I/Oterm
	B:NXOPTA2	Program version
	E1"E2	10001.0
READY	READY
I/Oterm	I/Oterm	I/O term
Expanders	A:NXOPTA1A	State
E1"E7	E1"E2	Run

Figure 7-22. Expander board information menus