Nx Networks NX series user manual 6286, Fault time data record

7

62(86) Control keypad

7.3.4.3Fault time data record

When a fault occurs the information described above in 7.3.4 is displayed. By pushing the right arrow menu button it is possible to view the Fault time data record menu indicated by T.1#T.13. In this menu, some selected important data valid at the time of the fault are recorded. This feature is intended to help the user or the service person to determine the cause of fault.

The data available are:

T.1	Counted operation days	d
	(Fault 43: Additional code)
T.2	Counted operation hours	hh:mm:ss
	(Fault 43: Counted operation days)	(d)
T.3	Output frequency	Hz
	(Fault 43: Counted operation hours)	(hh:mm:ss)
T.1	Counted operation days	d
T.2	Counted operation hours	hh:mm:ss
T.3	Output frequency	Hz
T.4	Motor current	A
T.5	Motor voltage	V
T.6	Motor power	%
T.7	Motor torque	%
T.8	DC voltage	V
T.9	Unit temperature	° C
T.10	Run status
T.11	Direction
T.12	Warnings
T.13	0-speed

Table 7-4. Fault time recorded data