Hi-Touch Imaging Technologies CS-320, CS-310 manual Always on

※When you select the YMCKO ribbon as your ribbon type, several options for Resin K will be available.

Disable	The “Resin K” within YMCKO ribbon will not be applied to print
	the black section and the black (RGB = 0, 0, 0) in graphical
	objects. It means the color in black (RGB = 0, 0, 0) will always be
Always on	composed by Y, M and C.
	The “Resin K” within the YMCKO ribbon will be applied to print
Text only	all of the black (RGB = 0, 0, 0) in the images.
	The “Resin K” within YMCKO ribbon will be applied to print the
	graphical object- “Text” which is transmitted by GDI command,
	but will not be applied to the black part in the images or the black
	(RGB = 0, 0, 0) of the graphical objects transmitted by the GDI
	command. For example, the Barcode is transmitted by the GDI
	command, but this option will not apply to Resin K within the
	YMCKO ribbon to the Barcode.
Disable when	doing The “Resin K” within the YMCKO ribbon will be applied to print
color printing	all the black (RGB = 0, 0, 0) graphical objects that are
	transmitted by the GDI command, but will not be applied to all
	the black (RGB=0, 0, 0) parts in the images.
Black/White	The “Resin K” ribbon will represent the color graphic/texts in
Resin Dither	black (RGB=0, 0, 0) and white printing style.
	Resin Dither applies different density of black-white mixing
	to transfer color graphic to different black level. If the text is
	the black (RGB=0, 0, 0) graphical object transmitted by
	GDI, then the text will not be shown by mixing color, but by
	the actual contents.

NOTE:

1.Graphical Device Interface, a Windows standard for dividing the images to many graphical objects and transmitting them to output devices, such as monitors and printers.

2.It is recommended to select “Disable doing color printing” if you are not going to use Card Désirée CS to print.

※When you select Resin K ribbon or KO ribbon as your ribbon type, then 2 options for the Resin K / KO ribbon will be available: Black/White and Resin Dither.

Black/White	The “Resin K” ribbon will represent the color graphic/texts in black
	(RGB=0, 0, 0) and white printing style.
Resin Dither	Resin Dither applies different density of black-white mixing to transfer
	color graphic to different black level. If the text is the black (RGB=0,
	0, 0) graphical object transmitted by GDI, then the text will not be
	shown by mixing color, but by the actual contents.

20www.hi-ti.com