Hi-Touch Imaging Technologies CS-310, CS-320 manual Safety Instructions

Page 3

SAFETY INSTRUCTIONS

1.Read these instructions carefully. Keep these instructions for future reference. Follow all warnings and instructions as marked on the product.

2.Unplug this product from the wall outlet before cleaning. Do not use liquid detergents or aerosol cleaners. Use a damp cloth for cleaning.

3.Do not use this product near water.

4.Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.

5.Openings in the cabinet and at the bottom provide ventilation; to ensure a reliable operation of the product and to protect it form overheating, these openings should not be blocked or covered. Placing the product on a bed, sofa, rug, or other similar surface may never block the openings. These products should never be placed near or over a radiator or a heat register, or in a built-in installation, unless proper ventilation is provided.

6.This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult with your dealer or with the local power company.

7.If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the ampere rating of the extension cord. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

8.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other harmful risks. Refer all servicing to qualified service personnel.

3

www.hi-ti.com

Image 3
Contents HiTi Card Printer CS-310/320 Acknowledgements Safety Instructions Troubleshooting Error Message & Solution ChapterOperation Instruction LCD Display Instruction Instruction HiTi Card Printer CS-310/320 FeaturesCheck Accessories Hardware InstallationCard Input Hopper Appearance of CS-310/320 CS-310/320 Front sideSpecification Label Power SwitchPower Socket USB ConnectorControl Button Control PanelLED Light LCD displayInstall Power Cord & USB Cable Install Cleaning Roller Install Card & Ribbon Contact smart card installation Magnetic stripe cardInstallation Ribbon Installation Software Installation Install Driver Windows 2000/XP/Vista Uninstall Driver Select Software / CardDesiree CS and install Install CardDesiree CSDriver Instruction ABC Device OptionAlways on Printing Area Setting Edit Area Color Color preference setting There are four optionsSkin Tone Adjuster Tools Abcdefrg Magnetic EncodingImport/Export About LaminationOperation instruction LCD display instruction..CARD OUT SNR How to maintain your printer 1Clean Cleaning Roller 2Clean Print Path Stand alone modePC link mode 3Clean TPH Head 4Clean Air Filter Cleaning Card-insert Mechanism Clean Ribbon Sensors Error Message and Solution TroubleshootingPlease install a new ribbon Auto Remove Card Press OK, the card Controller Error Message Possible Causes Solutions Ribbon CAM TPH Error Appendix a CS-310/320 Specification Appendix B Safety Instructions FCC Information Appendix C FCC Compliance StatementPage Page CE Information Page China Support ProcessWeb Support Contact Information TaiwanMiddle East & North Africa Latin AmericaIndia Appendix E Order Information