Hi-Touch Imaging Technologies CS-310, CS-320 manual Tools

Page 25

[Tools]

A

B

 

C

 

D

 

E

A. Printing Position Adjuster: You may set the thickness of the card and print out a test chat, then modify parameter [A] or [B] or [C] to adjust the printing position.

Notice:

1.Please make sure the position of the thickness adjuster on the printer matches the thickness of the card before proceeding to modify parameter [A] or [B] or [C] to adjust the printing position.

2.When you modify the printing position, please note that the red line is not too close to the edge of the card in order to avoid any ribbon damage.

B.Cleaning Tool: You can use the cleaning mode to clean your printer. (Use cleaning cards from HiTi.)

C.Maintenance Info: This function will display cleaning/maintenance records and show the procedure for the print head replacement.

D.Advance: To show Progress Bar or not.

E.Heating Energy: You can set ”YMC Dye”, ”K” parameters, ranging from 1 to

10to decide the color intensity. If you use the YMCKO ribbon, then you can adjust the parameters for YMC and Resin K within the YMCKO ribbon; however, if you decide to use the Resin K ribbon, only Resin K parameters can be adjusted.

25www.hi-ti.com

Image 25
Contents HiTi Card Printer CS-310/320 Acknowledgements Safety Instructions Chapter Troubleshooting Error Message & SolutionOperation Instruction LCD Display Instruction Instruction HiTi Card Printer CS-310/320 FeaturesCheck Accessories Hardware InstallationCard Input Hopper Appearance of CS-310/320 CS-310/320 Front sidePower Socket Power SwitchUSB Connector Specification LabelLED Light Control PanelLCD display Control ButtonInstall Power Cord & USB Cable Install Cleaning Roller Contact smart card installation Magnetic stripe card Install Card & RibbonInstallation Ribbon Installation Software Installation Install Driver Windows 2000/XP/Vista Uninstall Driver Select Software / CardDesiree CS and install Install CardDesiree CSDriver Instruction ABC Device OptionAlways on Printing Area Setting Edit Area Color Color preference setting There are four optionsSkin Tone Adjuster Tools Abcdefrg Magnetic EncodingImport/Export About LaminationOperation instruction LCD display instruction..CARD OUT SNR How to maintain your printer 1Clean Cleaning Roller Stand alone mode 2Clean Print PathPC link mode 3Clean TPH Head 4Clean Air Filter Cleaning Card-insert Mechanism Clean Ribbon Sensors Error Message and Solution TroubleshootingPlease install a new ribbon Auto Remove Card Press OK, the card Controller Error Message Possible Causes Solutions Ribbon CAM TPH Error Appendix a CS-310/320 Specification Appendix B Safety Instructions FCC Information Appendix C FCC Compliance StatementPage Page CE Information Page Web Support Support ProcessContact Information Taiwan ChinaLatin America Middle East & North AfricaIndia Appendix E Order Information