✱ Default All Output Settings ✱
Beeper Volume Selection
Off | Low |
Medium | ✱ High |
Output Delays Selection
This selection provides control of the time delays between data output by the scanner to the host terminal. The actual delay is 5 milliseconds multiplied by the programmed value (00 – 99). Default = 00.
Intercharacter Delay is the time delay between data characters output by the scanner to the host terminal.
Interfunction Delay is the time delay between function (key) codes output by the scanner to the host terminal.
Intermessage Delay is the time delay between data messages or records output by the scanner to the host terminal.
Example: You need a 45 millisecond delay. Scan the Intercharacter Delay bar code. Then scan “0” and “9” on the Programming Chart (09 x 5ms = 45 ms).
Intercharacter Delay (x5mS) ]
Interfunction Delay (x5mS) ] | Intermessage Delay (x5mS) ] |
]A
SCANTEAM 5700 User’s Guide |