Dell DR4100 PSU0003 Message, PSU0006 Message, PSU0016 Message, PSU0031 Message, PSU0032 Message

Error Code	Message Information
	Details	System performance and power redundancy may be degraded or
		lost.
	Action	Remove and reinstall the power supply at the next service window. If
		the issue persists, see Getting Help.
PSU0003	Message	The power input for power supply <number> is lost.
	Details	The power supply is installed correctly but an input source is not
		connected or is not functional.
	Action	Verify the input source is attached to the power supply. Verify the
		input power is within the operating requirements for the power
		supply.
PSU0006	Message	Power supply <number> type mismatch.
	Details	Power supplies should be of the same input type and power rating.
	Action	Install matched power supplies and review proper configuration in
		this manual.
PSU0016	Message	Power supply <number> is absent.
	Details	The power supply has been removed or has failed.
	Action	1. Remove and reinstall the power supply.
		2. Check cables and subsystem components in the system for
		damage.
		3. If the issue persists, see Getting Help.
PSU0031	Message	Cannot communicate with power supply <number>.
	Details	The power supply may operate, however power supply monitoring is
		degraded. System performance may be degraded.
	Action	Remove and reinstall the power supply. If the issue persists, see
		Getting Help.
PSU0032	Message	The temperature for power supply <number> is in a warning range.
	Details	System performance may be degraded.
	Action	Check the system operating environment, including airflow and inlet
		temperature. Check system logs for temperature and thermal
		component failures.

111