Removing A Hard Drive From A Hard-Drive Carrier
1.Remove the screws from the slide rails on the
2.Lift the hard drive out of the
Figure 15. Removing and Installing a Hard Drive Into a Hard-Drive Carrier
1.
2.hard drive
3.screws (4)
Installing A Hard Drive Into A Hard-Drive Carrier
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Insert the hard drive into the
2.Align the screw holes on the hard drive with the back set of holes on the
When aligned correctly, the back of the hard drive will be flush with the back of the
3.Attach the screws to secure the hard drive to the
Cooling Fans
Your system supports
43