bUsing a T10 Torx driver, remove the two screws that secure the display module to the system chassis.
cRemove the display module from the chassis cutout.
Figure 3-35. Control Panel Removal
5
4
3
6
2
1
7
1 | display module label | 2 | display module securing | 3 | display module |
|
|
| screws (2) |
|
|
4 | display module cable | 5 | control panel cable | 6 | control panel circuit board |
7
Installing the Control Panel Assembly
1Insert the display module into the chassis cutout and secure with the two Torx screws.
2Affix the display module label to the display module.
3Install the control panel board in the system chassis and secure with the three Phillips screws. See Figure
106