![](/images/new-backgrounds/1192601/19260131x1.webp)
Table 1-3 lists the drive indicator patterns for RAID hard drives. Different patterns are displayed as drive events occur in the system. For example, if a hard drive fails, the "drive failed" pattern appears. After the drive is selected for removal, the "drive being prepared for removal" pattern appears, followed by the "drive ready for insertion or removal" pattern. After the replacement drive is installed, the "drive being prepared for operation" pattern appears, followed by the "drive online" pattern.
NOTE: For non-RAID configurations, only the drive-activity indicator is active. The drive-status indicator is off.
Table 1-3. Hard-Drive Indicator Patterns for RAID
Condition | Drive-Status Indicator Pattern |
| |
Identify drive/preparing for | Blinks green two times per second |
removal | |
Drive ready for insertion or | Off |
removal | |
Drive predicted failure | Blinks green, amber, and off. |
Drive failed | Blinks amber four times per second. |
Drive rebuilding | Blinks green slowly. |
Drive online | Steady green. |
Rebuild aborted | Blinks green three seconds, amber three seconds, and off six seconds. |
| |